empox®GREEN is a water-soluble, two-component epoxy resin system that unites key advantages of other coating systems.
Containing less than 4g/l of VOCs and no reactive thinners, empox®GREEN is easy on the environment. Plus, its hardener has less than 1% free amines. Under current international regulations, empox®GREEN needs not to be labeled as a hazardous substance, making it easier to handle and transport.
empox®GREEN is especially easy to use: It comes complete with pre-matched quantities of its two components to ensure an optimum mix, can be applied with any standard tools, including spray guns, and has an extremely long pot life of around 8-9 hours.
As long as it is still wet, empox®GREEN removes easily from skin or clothing just by using water. Tools are also simple to clean and ready to reuse immediately.
empox®GREEN is not just great for large-scale jobs, it is also ideal for decorative or detailed painting and design work. That's why we offer empox®GREEN TopCoat in nine attractive colors.
BetonSealer
Concrete primer
TopCoat
Intermediate and top coat, available in 9 colors
PrimerAZP
Primer for aluminum, zinc, stainless steel, fiber glass, and powder and coil coatings
InnenMatt
Interior decoration, mat/satin finish
|
Specs at a glance |
|
Water-soluble |
|
Pot life of approx. 8 hours at 20°C |
|
Classed as non-hazardous (GGVS/ GGVE, RID/ADR, IMDG, ICAO-TI/IATA-DGR) |
|
VOC less than 4% when mixed |
|
Hardener contains less than 1% free amines |
|
With an organic solvent content of less than 125g/l when mixed, empox®PUR is easy on the environment and makes for better working conditions. Under current international regulations, it is not classified as a hazardous substance, making handling and transportation easier.
empox®PUR is especially easy to use: It comes complete with pre-matched quantities of its two components to ensure an optimum mix, can be applied with any standard tools, including spray guns, and has a pot life of around 2.5 hours at a temperature of 20°C.
You can apply empox®PUR TopCoat to metal and plastic surfaces of all kinds. In addition, empox®PUR TopCoat can be used as a finish on all surfaces prepared with empox® epoxy resin primers.
As long as it is still wet, empox®PUR removes easily from skin or clothing just by using water. Tools are also simple to clean and ready to reuse immediately.
empox®PUR is not just great for large-scale jobs, it is also ideal for decorative or detailed painting and design work. empox®PUR TopCoat is available in standard system colors, including RAL K7 Fandeck, Industrial Global (more than 200 colors), and ColorCue (1,000 colors), plus a range of shades for special effects.
|
Specs at a glance |
|
Water-soluble |
|
Pot life of 2.5 hours at 20°C |
|
Sprayable |
|
VOC less than 125g/l (mixed). Comparison: EU guidelines prescribe less than 250g/l; anything under 200g/l qualifies for the Eco Label. |
|
With our empox®FLOOR water-soluble two-component epoxy resin system, coating and refurbishing cement floors and concrete floors and walls is quick and easy.
Containing either zero solvents or less than 1% VOC, depending on the individual product, empox®FLOOR coatings are extremely eco-friendly. The partially pigmented hardener used in them is not classified as hazardous under current international regulations, allowing easier handling and transportation.
Using empox®FLOOR products is simple: They come complete with pre-matched quantities of both components to ensure an optimum mix, and have a pot life of around 2.5 hours at a temperature of 20°C. As long as they're still wet, they remove easily from skin or clothing just by using water. Tools and equipment are also simple to clean and ready to reuse immediately.
empox®FLOOR is not just ideal for for large-scale jobs, you can also use it for decorative or detailed painting and design work. That's why we offer empox®FLOOR in over 16 attractive standard colors. Custom colors are also available on request.
Floors coated poured using empox®FLOOR are especially resistant to abrasion, mechanical wear and chemicals - ideal for industrial applications
FLOORCompound
Filler for holes and shrinkage cavities; suitable for making cast-plaster floors; also usable with fabric reinforcement.
FLOORBase
Approx. 2 mm thick self-leveling floor system for concrete floors in garages, workshops and warehouses.
FLOORCoat
Coating for concrete floors, concrete protection coating.
Wall compound
Filler for holes and shrinkage cavities in walls; suitable for making cast-plaster walls and for fabric reinforcement.
Tile mortar
Mortar for ceramic and natural stone tiles.
|
Specs at a glance |
|
Water-soluble |
|
No reactive thinners |
|
Solvent-free or VOC less than 1%, depending on product |
|
Pot life of approx. 2.5 hours at 20°C |
|
Hardener classed as non-hazardous material |
|
empox R 60
Surface cleaner and conditioner for use with empox 61 (easy-to-clean coating for vehicle windshields), non-scratch glass and metal cleaner. Removes fine corrosion on aluminum, brass, copper, stainless steel and chromium. empox® R60 is the perfect surface preparation for following coatings i.e. clear coats, empox® nano-coatings.
empox® R60 is water based, labelling-free, odourless and biodegradable.
empox 61
Water and ice-repellent coating for vehicle windshields. Forms easy-to-clean surface that causes water to bead, even at low speeds.
|
|
About merkel coatings
merkel coatings
Auenstrasse 3
95185 Gattendorf
Germany
Tel. +49 (0)9281-40248
Fax +49 (0)9281-40240
E-mail: info@merkelcoatings.com
merkel maler & coatings ek
Business registration: DE-95030 Hof Local Court HRA3512
VAT reg. DE190643667 |
|